Customer trust is built by showing competence and credibility, which means demonstrating
a thorough understanding of your customer's equipment needs. As you know, proper
lubrication is a critical component of any regular maintenance program. To help
refresh you on terminology that may affect you or your customers' lubricants decisions,
Phillips 66 has developed the following glossary:
GLOSSARY TERMS:
Additives:
Any compound added to oil for the purpose of improving certain properties of the
oil.
Back to the top
Approved Aviation Oil:
Approved Aviation Oil is any brand name oil produced under the following specifications:
• Mineral Grades – SAE J1966 or MIL-L-6082 (obsolete) – This SAE Standard establishes
the requirements for non-dispersant, mineral lubricating oils to be used in four
-stroke cycle piston aircraft engines. Users should consult their airframe or engine
manufacturer's manuals for the latest listing of acceptable lubricants.
• Ashless Dispersant Grades – SAE J1899 or MIL-L-22851 (obsolete) – This SAE Standard
establishes the requirements for lubrication oils containing ashless dispersant
additives to be used in four stroke cycle, reciprocating piston aircraft engines.
Users should consult their airframe or engine manufacturer's manuals for the latest
listing of acceptable lubricants.
CAUTION: Some approved oils contain
anti-scuffing additives that should NOT be used during engine break-in. Always refer
to the label to ensure that the oil is correct for your application.
Back to the top
Ashless:
When burned, does not form a metallic ash, which could be a source of pre-ignition.
Back to the top
Ashless Dispersant (AD):
A cleanliness additive for engine oils and widely used in aviation piston engines.
Ashless dispersants do not contain metallic compounds and have no adverse affect
on the break-in process. (See also "Dispersant")
Back to the top
Boundary Lubrication:
A condition which occurs when the two surfaces are not completely separated by the
lubricant. Boundary lubrication often requires the use of EP additives.
Back to the top
Detergent:
A cleanliness additive made of metallic compounds to protect from sludge and varnish
build-ups. Detergents are not allowed in aviation piston engine oils qualified under
SAE J-1899 (obsolete MIL-L-22851) or SAE J-1966 (obsolete MIL-L-6082).
Note: No current aviation engine oil meeting the SAE J-1899 specification
contains detergent compounds.
Back to the top
Dispersant:
An ashless engine oil additive that helps prevent sludge, varnish and other engine
deposits by breaking up insoluble contaminant particles. These microscopic particles
are kept suspended (or "dispersed") in the oil so they can be carried
to the oil filter or until the oil is drained when no filter is installed.
Back to the top
Hydrodynamic Lubrication:
A system of lubrication in which the shapes and relative motion of the sliding surfaces
cause the formation of a full fluid film that has enough pressure to separate the
surfaces.
Back to the top
Micron (μm):
A unit of measure = 4 x 10-5 inches. (or 1 millionth of a meter). It is used to
measure oil film thickness and is also useful in specifying oil filter capabilities.
Back to the top
Mineral Oil:
Lubricating base oil distilled from crude oil; also a term used to distinguish it
from synthetic base oils. In aviation circles, this typically refers to un-additized
oil often used to break-in new or newly rebuilt piston engines.
Back to the top
Multiviscosity:
Engine oil that meets the requirements of more than one SAE viscosity grade classification
by passing tests at both high and low temperatures. Viscosity Index (VI) improvers
are employed and the designation "W" indicates winter grade.
Note: Multiviscosity aviation piston engine oils have the advantage
of quicker pumping at start-up, faster flow to the upper valve train, reduced strain
on the battery and starter, and a thicker oil film at high temperatures versus straight
grades.
Back to the top
SAE Grade:
System used by engine manufacturers to define the lubricating oil viscosity
requirements for their engines.
Back to the top
SAE Viscosity vs. MIL Grade:
SAE Viscosity
|
MIL Aviation Grade
|
|
30
|
65
|
|
40
|
80
|
|
50
|
100
|
|
60
|
120
|
Back to the top
Scuffing:
Severe adhesive wear resulting from metal transferring from one surface to a mating
surface due to solid phase welding or abrasive effects between sliding surfaces.
Back to the top
Sludge:
A coagulated mass, often containing foreign matter, formed at low temperature in
piston engines from oil oxidation residues, carbon and water.
Back to the top
Synthetic Oil:
Lubricating fluid made by chemically reacting materials of a specific chemical
composition to produce a compound with planned and predictable properties.
Note: Full synthetics have been unsuccessful in aviation piston
engines due to incompatibility with leaded fuel. Synthetic blends are sometimes
used. However, we have not found these to be of similar added value (cost vs. performance)
in aviation piston engines as they are in automotive or heavy duty trucking applications.
Back to the top
TCP:
Tricresyl Phosphate or Triphenyl Phosphate. An oil additive which acts as an anti-scuff
agent in a lubricant or a lead-scavenger when used as a fuel additive. This property
in a lubricant is called for with specific Lycoming engines which require the use
of LW-16702. (See also "Scuffing")
Back to the top
VI Improver:
Viscosity Index Improvers are chemical polymers which expand with increasing
temperature to counteract oil thinning. The higher the Viscosity Index, the smaller
the relative change in viscosity with temperature.
Back to the top
Viscosity:
Measure of liquid resistance to flow at a specific temperature.
Back to the top
W (e.g. 20W-50):
Grade numbers followed by the letter "W" (i.e. 5W-, 10W-, etc.) identify oils suitable
for winter service. Viscosities for those oils are determined at various cold temperatures
on a laboratory Cold Cranking Simulator (CCS) and Mini Rotary Viscometer (MRV).
Numbers without the W (i.e. 50, 60, etc.) identify oils which are tested at high
temperature only. (See also "Multiviscosity")
Back to the top
